Sunshine Supply Company IncorporatedSunshine Supply Company Incorporated
Registered UsersSign In
 | Shipping 
 | Tax 
 | Terms
 Request for Quote 0 Items
All Categories > Waterproofing Systems > Fluid Applied Waterproof Membranes > Tremco, Inc. > Tremco Tremprime Non-Porous Primer > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Tremco Tremprime Non-Porous Primer

Check up to five results to perform an action.

 Non-porous surfaces, urethane sealants and coatings. A low-VOC, water-based, quick-drying, one-part primer. TREMprime Non-Porous Primer is not a film-forming primer. It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.

• Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied.
• Dry time is 15 minutes at 70ºF. Primer must be completely dry before applying sealant or coating.
• Urethane sealants and coatings can be applied up to 8 hours after primer has been applied. After 8 hours, the surface must be cleaned with MEK or Xylene and reprimed with TREMprime Non-Porous Primer.
• Coverage Rate: 1400 - 1800 sq. ft. per gallon.

  Results 1 - 1 of 1 1 

Item #

Product Name


Unit Quantity


TRPRIMENPP.1QT Tremprime Non-Porous Primer per quart (plastic container) Per Quart 2.5 lbs. Per Quart
  Results 1 - 1 of 1 1