Sunshine Supply Company IncorporatedSunshine Supply Company Incorporated
Registered UsersSign In
 | Shipping 
 | Tax 
 | Terms
 Request for Quote 0 Items
All Categories > Flooring Materials and Coatings > Floor Underlayment and Accessories > Sika > Sika Level Skim Coat > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Sika Level Skim Coat

Check up to five results to perform an action.

Fast Setting, cement-based skim mortar for thin section repair or re-profiling before Sika Level underlayments or general floor coverings

Description
Sika Level SkimCoat is a one-component, easy to use and fast drying cementitious mortar ideal for the repair or re-profiling of concrete, approved wood subfloors and correctly prepared ceramic or quarry tiles before the installation of Sika Level underlayments or final floor coverings. Easily applied and with both high adhesion values and fine finishing qualities it can be used fill and level defects from 1/2 inch (0-13 mm) in depth.





Where to Use

  • Used to repair minor defects, holes and cracks in concrete and wood subfloors before installing underlay ments or final covering
  • To pre-fill non-moving joints and seams in concrete and wooden substrates
  • To skim correctly prepared tiles and stable, non-bleeding adhesive residue
  • Used to re-profile rough substrates or subfloor surfaces from feather edge to 13 mm prior to applying levelers or floor finishes

Advantages

  • Easy to prepare and quick to apply
  • Zero VOC content
  • Repairs new and renovates old floors
  • Good adhesion to substrates, subfloors and stable adhesive residue
  • Rapid setting; receives primers, levelers, adhesives and coverings without delay
  • Excellent standard of finish can be achieved to allow direct application of coverings

Coverage

  • Each 10 lb (4.5 kg) bag covers approximately:
  • 100 to 150 ft2 (9 to 14 m2) over plywood
  • 200 to 250 ft2 (18 to 23 m2) over concrete.
  • Coverage figures do not include allowance for surface profile and porosity, applied thickness or material waste.

Cure Mechanism
Sika Level SkimCoat must be allowed to air cure. Protect from excessive heat and drafts while curing. Do not wet cure or use curing and sealing compounds.





   
  Results 1 - 1 of 1 1 

Item #

Item Name

SIKLVLSKIM.10LB Sika Level SkimCoat
  Results 1 - 1 of 1 1