Olark live chat software
Request for Quote
Flooring Materials and Coatings
Epoxy and Urethane Floor Coatings
Sikalastic 710/715 Traffic System
Email This Page
Save To Favorites
Sikalastic 710 Base Coat
Detailing Non-structural cracks up to 1/16 inch:
Apply a detail coat of Sikalastic 710 Base at 32 mils wet, 4” wide,
centered over the crack. Allow to become tack free before overcoating.
Cracks and joints over 1/16 up to 1 inch:
Rout and seal with Sikaflex 2c or 1a sealant and allow to cure.
Apply a detail coat of Sikalastic 710 Base at 32 mils wet, 4” wide, centered over crack. Allow to become tack free before overcoating.
Joints over 1 inch:
Should be treated as expansion joints and brought up through the Sikalastic Traffic
System and sealed with Sikaflex 2c or 1a sealant.
Thoroughly mix Sikalastic 710 Base using a mechanical mixer (Jiffy) at slow speeds until a homogenous
mixture and color is obtained. Use care not to allow the entrapment of air into the mixture. Apply at the
recommended coverage rate (see System Guide) using a notched squeegee or trowel and backroll using a
phenolic resin core roller. Extend base coat over entire area including previously detailed cracks and control
joints. Allow coating to cure a minimum of 16 hours at 70°F and 50% RH or until tack free before top coating.
System Guide Pedestrian Traffic Heavy Pedestrian / Light Vehicular Heavy Vehicular Traffic
710 Detail Coat 32 mils wet over properly treated cracks and joints
710 Base Coat 32 mils wet (23 mils dry) - 50 sf/gal.
Sikalastic 710 Base Coat MSDS
Sikalastic 710/715 Traffic System Tech Data