Olark live chat software
Request for Quote
Flooring Materials and Coatings
Epoxy and Urethane Floor Coatings
Sikalastic 720/745 Lo-VOC Traffic System
745 Top Coat
Email This Page
Save To Favorites
745 Top Coat
Premix Sikalastic 745 AL Part A using a mechanical mixer (Jiffy) at slow speed to obtain uniform color, making sure to scrape the solids from the bottom and sides of the pail. Add Part B and continue mixing until a homogenous mixture and color is obtained (typically 3 minutes). Use care not to allow the entrapment of air into the mixture. Apply at the recommended coverage rate (see System Guide) and backroll using a phenolic resin core roller. Apply aggregate evenly distributed at the appropriate rate immediately into the wet coating and backroll if required (see System Guide). Allow coating to cure a minimum of 3-4 hours at 70°F and 50% RH or until tack free between coats, and a minimum of 36 hours before opening to vehicular traffic.
Use clean, rounded, oven dried quartz sand with a minimum gradation of 16-30 mesh for vehicular traffic and 20-40 mesh for pedestrian traffic, and a minimum hardness of 6.5 per the Moh’s scale. It should be supplied in pre-packaged bags and free of metallic or other impurities. Seeding of aggregate means an even, light broadcast short of to refusal. Any loose aggregate must be removed prior to recoating. Backroll aggregate where indicated.
745AL Part A MSDS
745AL Part B MSDS
Sikalastic 720/745(Low VOC) Traffic System