Epoxy 100 is a two component water-based epoxy system that features ease of application, very low odor and excellent overall coating performance. This material cures blush free over a wide range of temperatures and adheres tenaciously to a variety of substrates including damp or wet concrete. Because of its affinity for moisture and inherent alkalinity resistance, Epoxy 100 may be used over green concrete with proper surface preparation.
Epoxy 100 is used as a general purpose coating for concrete floors and as a primer under epoxy, polyurethane and acrylic materials. The raw material package has a 30 year history of success as a concrete coating. Epoxy 100 is recommended for coating warehouse and ...
Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete.
Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.
Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with ...
Epoxy 400 is a low viscosity, 100% solids resin system used in a variety of flooring applications including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility and chemical resistance.
Epoxy 400 has excellent clarity for use over color quartz aggregate and decorative architectural concrete. The pigmented material features high pigment loading for good substrate hide and color consistency when roller applied. Epoxy 400 has considerably lower viscosity than most competitive products providing improved handling at cooler temperatures and exceptional troweling characteristics.The ...
APF Vinyl Acrylic Paint Chips are colorfast chips used in decorative seamless flooring. Standard chip size is 1 inch, but can also be ordered in 1/8, 1/4 and 5/8 inches for an additional $0.25 per pound.
Granitex Blended Chips offer 12 different vinyl acrylic chip blends for use in our Granitex flooring system. Chip blends are available in 1, 1/8, 1/4 and 5/8 inches. (1/4" is the standard stocking size)
Polyurethane 100 VOC is a two component, high solids aliphatic polyurethane formulated to comply with California V.O.C. regulations. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 100 VOC produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to ensure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required.
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. Polyurethane 501 meets the 50 grams per liter California VOC limits. It offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining.
Polyurethane 501 gives hard, durable coatings that feature good gloss, easy cleanability and superior abrasion resistance. Resistance to yellowing from U.V. light is excellent. For exterior desert ...