Sunshine Supply Company IncorporatedSunshine Supply Company Incorporated
Registered UsersSign In
 | Shipping 
 | Tax 
 | Terms
 Request for Quote 0 Items
All Categories > Flooring Materials and Coatings > Epoxy and Urethane Floor Coatings > Sika > Sikalastic 720/745 Lo-VOC Traffic System  
 

Sikalastic 720/745 Lo-VOC Traffic System


Click on a Product to view details.

sika logo knockout

FTP Primer - 7 Gallon Unit


Sikafloor FTP 7 gal. kit - two 1 gal. cans Part “R” and two short-filled pails
Part “H” (1.25 gal. each). Kit yields 7 gal. after dilution with
2.5 gal. water (see mixing instructions below)

Priming Concrete and Plywood:
 Apply Sikafloor FTP with a flat squeegee or roller at approximately 300 sf/gal. and
work well into the substrate to ensure adequate penetration and sealing and puddles are avoided. Refer to
separate data sheet for more detailed information, or consult Sika for other primer options.
 
System Guide Pedestrian Traffic Heavy Pedestrian / Light Vehicular Heavy Vehicular Traffic
Primer Sikafloor FTP - 300 sf/gal. ...
sika logo knockout

720 Base Coat


Detailing Non-structural cracks up to 1/16” - Apply a detail coat of Sikalastic 720 Base at 24 wet mils, 4” wide, centered over the crack. Allow to become tack free before overcoating.

Cracks and joints over 1/16 up to inch - Rout and seal with Sikaflex 2c or 1a sealant and allow to cure. Apply a detail coat of Sikalastic 720 Base at 24 wet mils, 4” wide, centered over crack. Allow to become tack free before overcoating.

Joints over 1 inch - Should be treated as expansion joints and brought up through the Sikalastic Traffic System and sealed with Sikaflex 2c or 1a sealant.

Base Coat Premix mix Sikalastic 720 Base Part A and Part B material using a ...
sika logo knockout

745 Top Coat


Top Coats Premix Sikalastic 745 AL Part A using a mechanical mixer (Jiffy) at slow speed to obtain uniform color, making sure to scrape the solids from the bottom and sides of the pail. Add Part B and continue mixing until a homogenous mixture and color is obtained (typically 3 minutes). Use care not to allow the entrapment of air into the mixture. Apply at the recommended coverage rate (see System Guide) and backroll using a phenolic resin core roller. Apply aggregate evenly distributed at the appropriate rate immediately into the wet coating and backroll if required (see System Guide). Allow coating to cure a minimum of 3-4 hours at 70°F and 50% RH or until tack free between coats, and a minimum of 36 hours before opening to ...
sika logo knockout

700 ACL Accelerator


Accelerator Sikalastic 700 ACL may be added to Sikalastic 710 Base or 715 Top in order to speed cure time particularly
in cold weather conditions. Mix thoroughly prior to application. Add a maximum of 1 quart to 5 gallons (or
1:20 ratio) and only to material that will applied within 2-3 hours.
sika logo knockout

735 AL, 736 AL Lo-VOC and 748 PA Aliphatic Top Coats


Sikalastic Aliphatic Top Coats are optional top coats for the Sikalastic 710/715 and 720/745 Traffic Systems. They provide superior UV resistance, color stability and cleanability as well as more decorative options. 
 
The series includes:
Sikalastic 735 AL one-component, moisture cured, aliphatic polyurethane top coat
Sikalastic 736 AL Lo-VOC one-component, moisture cured, low-VOC, aliphatic polyurethane top coat
Sikalastic 748 PA two-component, chemically cured, low-VOC, aliphatic polyaspartic top coat
Sikalastic 700 ACL optional accelerator

Where to Use:
Sikalastic Aliphatic Top Coats are part of Sikalastic Traffic Systems, which are suitable for use on structurally sound ...