Sunshine Supply Company IncorporatedSunshine Supply Company Incorporated
Registered UsersSign In
 | Shipping 
 | Tax 
 | Terms
 Request for Quote 0 Items
All Categories > Waterproofing Systems > Fluid Applied Waterproof Membranes > Tremco, Inc.  
 

Tremco, Inc.


Click on a Product to view details.

Image

Tremproof Vulkem 201 Polyurethane Membrane

(3)
TREMproof 201/60 is a high solids, VOC-compliant, modified polyurethane waterproofing membrane. TREMproof 201/60 is a one-part moisture curing elastomer. TREMproof 201/60 is available in three viscosities (SL, R and T) that are suitable for applications to horizontal and vertical surfaces at 60 wet mils (T grade applied up to 2").

Basic Uses
TREMproof 201/60 is a fluid-applied, elastomeric waterproof Membrane System. The system is spray, roller, trowel, or squeegee applied and cures to form a continuous, seamless, positively bonded elastomeric waterproof membrane. TREMproof 201/60 is commonly used "between slab" on plaza decks, parking decks, roof terraces, podiums, and reflecting pools where a standard 60 mil ...
Image

Tremproof Vulkem 250GC Polyurethane Membrane

(3)
TREMproof 250GC is an aliphatic, rapid curing, high solids, VOC compliant, modified polyurethane waterproofing membrane that can be applied to Green or Damp Concrete. TREMproof 250GC is a one-part moisture curing elastomer available in three viscosities (SL, R and T). Both the SL (Self-Leveling) and R (Rollable) viscosities are suitable for horizontal applications. The R (Rollable) grade is suitable for vertical and cant bead applications. The T (Trowelable) grade is suitable for cants and around penetrations.

Basic Uses
Tremproof 250GC is a fluid-applied, elastomeric waterproofing membrane that can be applied to "Green" Concrete. Tremproof 250GC is commonly used between slab on plaza decks, parking decks, roof terraces, ...
Sunshine Image default logo

Tremproof 260 Spray-Applied Waterproof Membrane


TREMproof® 260 Spray-Applied Waterproofing Membrane is a polymer-enhanced, single-component, fluid-applied asphalt emulsion waterproofing membrane. It is designed for spray application to concrete, masonry and other structural substrates, primarily in vertical installations. TREMproof 260 is water-based, so it can be applied to damp or green concrete. Also, it complies with the Volatile Organic Compound (VOC) limits established by the South Coast Air Quality Management District (California). Additionally, TREMproof 260 can be applied either with or without cospray, allowing for job-specific flexibility in application methods.

 

Basic Uses
Typical applications for TREMproof ...

Sunshine Image default logo

Tremproof 6100 Hot-Applied Waterproof Membrane


One-part, 100% solids, hot-applied, rubberized asphalt waterproofing membrane.

Basic Uses
TREMproof® 6100 is ideally suited for new and remedial waterproofing applications. The TREMproof 6100 system is applied to primarily horizontal but also vertical concrete surfaces and is designed for use on plaza decks, roof decks, parking garages, foundation walls, mud slabs, tunnels, and planters.

Sunshine Image default logo

Tremco Multi-Surface Urethane Primer


Usage:
 Porous surfaces and interlaminary. Urethane coatings. Low-VOC (<60 g/L), two-part epoxy primer used to condition and prep porous surfaces and existing coatings for application of a new coating layer.

• Apply with a short nap roller or brush evenly to the surface.
• Primer must dry completely before coating application as indicated by turning from milky-white to completely clear.
• Coverage Rate: 200 - 300 sq.ft. per gallon.
Sunshine Image default logo

Tremco Primer #10


Usage:
Non-porous surfaces, silicone sealants A one-component primer used to enhance adhesion of silicone sealants on non-porous surfaces such as metals and plastics. Tremco Primer #10 is also approved for Structural Glazing applications.

• Apply with a clean brush or cloth. Remove all excess primer from brush or cloth to ensure a very thin layer is applied.
• Dry time is 15 minutes at 70ºF. Primer must be completely dry before applying sealant.
• Silicone sealants can be applied up to 8 hours after primer has been applied. After 8 hours, the surface must be cleaned with IPA and reprimed with Tremco Primer #10.
• Coverage Rate: 1400 -1800 sq. ft. per gallon
Sunshine Image default logo

Tremco Tremprime Non-Porous Primer


Usage:
 Non-porous surfaces, urethane sealants and coatings. A low-VOC, water-based, quick-drying, one-part primer. TREMprime Non-Porous Primer is not a film-forming primer. It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.

• Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied.
• Dry time is 15 minutes at 70ºF. Primer must be completely dry before applying sealant or coating.
• Urethane sealants and coatings can be applied up to 8 hours after primer has been applied. After 8 hours, the surface must be cleaned with MEK or Xylene and reprimed with TREMprime Non-Porous ...
Sunshine Image default logo

Tremco Tremprime Silicone Porous Primer


Usage:
 Porous surfaces, silicone sealants One-component primer used to enhance adhesion of silicone sealant to porous surfaces such as concrete and limestone.

• Apply generously with a clean brush or cloth.
• Dry time is 30-45 minutes at 70ºF. Primer must be completely dry before applying sealant.
• Silicone sealants can be applied up to 8 hours after primer has been applied. After 8 hours, the surface must be cleaned with IPA and reprimed with TREMprime Silicone Porous Primer.
• Coverage Rate: 500 - 600 sq. ft. per gallon 9600 lf/gal - ½” band.
Tremco Vulkem 171 Primer

Vulkem 171 Primer


Usage:
Porous surfaces, Vulkem brand urethane sealants and Vulkem Coating Systems and TREMproof membranes Quick-drying, one-part, moisture-curing primer. It is used as an adhesion promoter for Vulkem brand urethane sealants and coatings and TREMproof membranes on porous surfaces such as concrete and wood.

• Apply generously with a clean brush or roller. Do not apply in excess where it will puddle or pond.
• At 70ºF, allow 30-45 minutes for primer to become tacky before applying sealant, coating or membrane. Do not allow primer to dry completely.
• Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with Xylene and coat with Vulkem Primer No. 191.
...
Tremco Vulkem 191

Vulkem 191 Primer


Usage:
It is used to prepare surfaces of cured urethane sealants, coatings, and TREMproof membranes that will be sealed with a fresh coat.

• Apply with a clean brush or roller. Dry time is 15-45 minutes at 70ºF. Apply coating or sealant within one hour after application when primer is still tacky but does not come off substrate. Primer will yellow with time if left exposed. Do not apply in excess to other substrates not intended to be coated.
• Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with Xylene and coat with Vulkem Primer # 191.
• Do not apply in excess or allow to puddle. Use a short nap roller only.
• Coverage Rate: 450 - 600 sq. ft. ...