ETR Epoxy Paste-Over Ideal for pasting over the surface of cracks and attaching ports for pressure injection. The non-sag paste consistency enables paste-up on horizontal, vertical and overhead applications. Fast cure time means shorter time between paste-over and injection. Packaged as a kit in separate 8 oz. canisters which are mixed manually to yield 16 ounces of epoxy. Also ideal for small concrete repair application: spall repair and misc. patching. Each kit contains enough material to cover approximately 8 lineal feet of cracks.
ET Epoxy-Tie® is a two-component, high solids, epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. ET meets the ASTM C-881 specifications for Type I, II, IV and V, Grade 3, Classes B and C, except gel time.
SET-XP™ is a 1:1 two component, high solids epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. SET-XP™ adhesive has been rigorously tested in accordance with ICC-ES AC308 and 2006 IBC requirements and has proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. SET-XP™ adhesive is teal in color in order to be identified as a high-performance adhesive for adverse conditions. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET-XP™ adhesive exceeds the ASTM C881 specification for Type I and Type IV, Grade 3, Class C epoxy..
SET Epoxy-Tie® epoxy is a two-component, 1:1 ratio, high solids, epoxy-based adhesive for use as a high strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV and V, Grade 3, Class B and C.
ETI injection epoxies are specially designed formulations for the injection of cracks in concrete. ETI epoxies are two-component, 1:1 ratio, high solids formulations. They are available in 22 ounce side-by-side cartridges and are dispensed through a static mixing nozzle using a manual, battery or pneumatic dispensing tool. ETI is available in two viscosities: ETI-LV (low viscosity) and ETI-GV (gel viscosity) to handle a wide range of crack widths. Properly installed, they provide a repair that is both waterproof and high strength (structural).