NP 2™ is a three component, highly flexible, nonpriming, high performance polyurethane sealant, It has been successfully tested for joint movement of plus or minus 50%. Choose from 40 popular stock colors and 470 standard colors.
SL is a multi-component, self-leveling, elastomeric polyurethane sealant that is mixed and poured in place. When cured, it forms a tough. resident joint seal that resets penetration, abrasion, and remains flexible when exposed to weather and aging.
Sonolastic 150 with VLM Technology is a premium, very low-modulus, highmovement, nonsag, fast-curing, readyto- use, silyl-terminated polyether sealant. It combines the best qualities of organic and silicone sealants to keep moving joints weathertight.
Where to UseApplication • For sealing a variety of building joints, particularly in EIFS, against water and air intrusion • Joints with extreme movement • In place of silicone sealants • Curtain wall construction • Expansion joints • Panel walls • Precast units • Aluminum, vinyl, and wood window frames • Fascia • Parapets • Sanitary ...
NP 1 is a one-component, high performance, nonpriming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.
Where to Use Application
• Expansion joints • Curtain wall construction • Panel walls • Precast units • Aluminum and wood window frames • Roofing • Fascia • Parapets • Structural components • Vinyl siding • Wastewater treatment plants • Dams • Spillways and storm drains • Wetwells and manholes
Primer 733 is a quick-drying solventbased primer for priming joints and substrates before application of Sonolastic NP 1, TX 1, NP 2, Ultra, SL 1, SL , and Sonolastic 150 series sealants. Primer 766 is a high-solids, low- VOC solvent-based primer for priming joints and substrates before application of Sonolastic NP 1, TX 1, NP 2, and Ultra sealants.
Where to Use Application • As primers for Sonolastic® joint sealants
Yield PRIMER 733 AND PRIMER 766 35 – 40 ft2/pt (6.87 – 7.86 m2/L) 450 linear ft (137 m) for a 1/2" (13 mm) deep joint
Sonomeric 1 is a ready-to-use self-leveling polyurethane sealant for horizontal joints in chemical and industrial environments. It is weather, chemical, and jet-fuel resistant and has exceptional elongation.
Where to Use Application • Airport runways • Highways and bridges • Industrial floors • Driveways and loading docks • Stadiums
LOCATION • Horizontal • Exterior or interior • Above grade
Sonolac is a siliconized acrylic-latex gun-grade caulk for use in generalpurpose exterior and interior applications. Its performance characteristics exceed those of oilbased caulks and most butyl caulks.
Where to Use Application • Filling joints between walls and woodwork • Patching wall cracks • Sealing joints and openings at counter tops, vanities, venting, plumbing, or other fixtures
Sonneborn Premium Adhesive is a high-strength, high-solids, low-VOC polyurethane adhesive that is 3 times stronger than conventional adhesives. Its technologically advanced formula produces a permanent overnight bond to almost any substrate. Use it in all climates.
Where to Use Application • Interior and exterior • Above grade
SUBSTRATE • Treated and untreated lumber • Foam insulation • Brick • Metal • Concrete • Masonry • Most rigid building materials
Sonolastic Polysulfide Sealant is a multi-component, high-performance, low-modulus polysulfide sealant. Its elastomeric properties allow +25% joint movement. It withstands constant water immersion and will not degrade under limited chemical exposure.
Where to Use Application • Substrates immersed in water • Areas with limited chemical exposure • Exterior precast panels • Curtain and window wall construction joints • Foundations • Tanks
LOCATION • Exterior or interior • Above and below grade
SL 1 is a one-component nonpriming, self-leveling elastomeric polyurethane designed for expansion joints in concrete floors and decks. Use it where flexibility as well as abrasion and puncture resistance are required.
Where to Use Application • Expansion joints • Pavers • Plaza decks • Industrial floors • Driveways • Sidewalks • Decks • Parking areas • Pitch pans
TF-100 is a two-component self-leveling 100% solids polyurea control joint filler designed to protect joints in industrial concrete floors subject to hard wheels and heavy loads. TF-100 provides excellent resistance to spalling, abrasion, chemical attack, and corrosion. It is also ideal for filling random cracks.
Where to Use Application • Control joints in concrete • Retail and warehouse floors • Random crack filling
TX 1 is a one-component, texturized, moisture-curing, gun-grade poly-urethane sealant. It requires no mixing and typically requires no priming on common building materials. TX 1 has a textured appearance, which blends well with masonry substrates.
Where to Use Application • Expansion joints • Panel walls • Precast units • Aluminum and wood window frames • Vinyl siding • Fascia • Parapets • Roofing • HVAC
LOCATION • Horizontal and vertical joints • Interior and exterior
Ultra is a one-component, moisture-curing, aliphatic, nonsag, polyurethane sealant for security and institutional uses requiring elasticity and superior color integrity. Ultra is capable of withstanding ±25% movement in joints, yet has a high Shore A for security applications.
Where to Use Application • Expansion joints • Curtain walls • Panel walls • Precast units • Aluminum, vinyl, and wood window frames • Prisons • Schools • Stadiums • Parking decks • Plazas • Store fronts • Wastewater treatment plants • Dams • Spillways and storm drains ...